| Last Modified: 11-29-2007 | 1.6 G | |
| Service Category: Drivetrain | Section: Drive Shaft/Propeller Shaft | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000002HBO003X |
| Title: DRIVE SHAFT / PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD): INSPECTION (2008 Sequoia) | ||
INSPECTION
1. INSPECT PROPELLER SHAFT ASSEMBLY
|
(a) Using a dial indicator, measure the propeller shaft runout. Maximum runout: 1.02 mm (0.0402 in.) If the shaft runout is greater than the maximum, replace the propeller shaft. |
2. INSPECT UNIVERSAL JOINT SPIDER BEARING
|
(a) Inspect the spider bearing for wear or damage. |
(b) Using a dial indicator, measure the spider bearing axial play by turning the yoke of the flange while holding the shaft tightly.
Maximum runout:
0.05 mm (0.00197 in.)
If the spider bearing axial play exceeds the maximum, replace the spider bearing.
|
|